线缆

备注:标准长度1米(3英尺);标准长度1.2米(4英尺);标准长度1.8米(6英尺)

单晶探头和配件可以精确测量较薄的材料,如各种金属,而且可以覆盖非常宽泛的厚度和直径范围。这些探头有各种尺寸和频率等。

线缆

备注:标准长度1米(3英尺);标准长度1.2米(4英尺);标准长度1.8米(6英尺)

备有多种线缆级别可供选择,以满足用户特定的应用需求。

标准长度为1米(3英尺)、1.2米(4英尺)、1.8米(6英尺)。订购线缆时,请将下面各表中工件编号中的X换为以英尺为单位的所需线缆的长度值。

用户可以定制线缆的长度;订购时请明确表明线缆的长度。

工件编号的前缀表明线缆两端的连接器类型。

所有线缆的阻抗都为50欧姆, 除非另有说明。

如需要特殊的或定制的线缆,敬请与我们联系上海楹点 15121077168。

Test blocks are necessary for the calibration of ultrasonic thickness gages and should be used to maintain and verify the accuracy, dependability and reliability of ultrasonic measurements. Blocks are held to tighter tolerances than called out in ASTM E797 code. Metric test blocks are available.

Transducer Cables
Olympus-NDT offers a wide selection of transducer cables suitable for all ultrasonic thickness gaging instrumentation.

Standard

Standard cables are recommended for normal usage.

Heavy Duty - Teflon

Heavy duty, Teflon (HD) transducer cables may provide durability and longer life.

Waterproof

Waterproof (W) cables are recommended in many tests with immersion transducers. These cables provide a waterproof connection good to about 30 ft (10 m) of fresh water. At greater depths, special cables are available.

Heavy Duty - Armored PVC Jacket

Heavy duty, armored PVC jacket (HDAP) transducer cables have a spiral stainless steel jacket with a solid PVC coating. Maximum length is 20 ft (7 m).

Heavy Duty - Armored Silicone Jacket

Heavy duty, armored super flexible silicone jacket (HDAS) transducer cables combine a spiral stainless steel jacket with a heavy silicone coating for great flexibility. Length can be specified up to 20 ft (7 m).

Heavy Duty - Stainless Steel

Heavy duty, armored stainless steel jacket (SSA) transducer cables are recommended for heavy and industrial use provide flexibility, protection and long life.

双晶探头主要用于腐蚀材料的测量,如:锅炉管和铸铁。这些探头具有各种频率、尺寸及抗温能力,可为大多数腐蚀应用提供现货供应的解决方案。