- 品牌/型号:/
氧化铝瓷球用量计算 Dosage calculation of aluminaballs 湿磨过程中,计算球石用量以净体积的50%为状态,应用经验公式即可估算球石使用重量: During wetgrinding process, when charge dosage of alumina balls is up to 50%of net volume of ball mill, the best status can be realized, andthe weight of ball body within ball mill can be estimated withformula: G:3.14r2dL50%÷1000 G:球石装填重量(kg)charge weight ofalumina balls(kg) r:筒体半径(cm)radius of cylinder(cm)d:球石堆积比重(g/cm3)stacking proportion of alumina balls(g/cm3)L:筒体净长度(cm)net length of cylinder(cm)为提高研磨能力,所加入的助磨剂不同,上述公式也有所变化。
In order to improve the grinding ability, the above formula wouldbe changed simultaneously due to the difference of grinding aids.湿式球磨机对物料的粉碎主要靠研磨而不是冲击。因此,建议球石的大小比例为大球20%、中球30%、小球的50%作为初始配比。可达到良好的研磨效果。在实际使用过程中还要根据被研磨物料的粒度、球磨机的大小、转速等因素作适当调整,就能保证的研磨效果与粒度分布。
Wet ball mill smashes materials mainly through grinding instead ofimpacting. So, the initial ball charge proportion is advised aslarge size ball 20%, middle size ball30%, and small size ball 50%,which can get good grinding effect. In practice, the proportionmust be adjusted depending on the granularity of raw materials,diameter and rotary speed of ball mill, to ensure the best grindingeffect and granularity.
13583394158
- 宋方超
- 手机:13583394158联系我时,请告知来自行业信息网!
- 公司地址:中国 山东 淄博市 张店区南定镇工业路
- 公司主页: http://zibo1270502.cn.cnlinfo.net