- 动力形式:气动式无气喷涂机
- 种类:无空气喷涂机
- 类别:喷涂机
- 整机重量:70(Kg)
GP2538-2高压无气喷涂机
GP2538-2 pressure airless coating equipment
喷:环氧富锌底漆、环氧云铁中间漆、丙烯酸聚氨酯面漆、无机锌涂料、常规油漆、各种底漆、油性漆、磁漆、其他水性漆、防火涂料、各类涂料。
GP2538-2高压无气喷涂机是无机锌和环氧富锌涂料专用喷涂设备,也是我公司自行研制的第三代系列产品。适宜于喷涂各种厚膜型无机锌或环氧富锌底漆,环氧云铁中间漆,丙烯酸聚氨酯面漆,也适宜于各类钢材自动抛丸涂装流水线。喷涂无机锌或环氧富锌车间保养底漆、环氧云铁中间漆,丙烯酸聚氨酯面漆、各种底漆、油性漆、磁漆、其他水性漆、防火涂料、各类涂料。主要应用于钢结构、C型钢、船舶、汽车、挂车、地坪、铁道车辆、集装箱、管道、储罐、油罐、起重设备、桥梁、水闸等大型构件的涂装。
GP2538-2high pressure airless sprayer is specially for the coating of inorganic zinc and epoxy zinc rich, and the third series products developed by our company. suitable for various inorganic zinc and epoxy zinc rich coating of thick film type, and also suitable for various steel automatic shot painting stream line, inorganic zinc and epoxy zinc rich maintenance primer for production plant main tenance. The products are mainly used for the coating of large components like steel structure, ship, automobile, trailer, floor on ground, railway vehicle, container, pipeline, storage tank, bridge, water locks, etc.
产品优势:
1.排量特别大,在用相同规格的喷嘴喷涂时,液压柱塞及活塞杆运动速度缓慢,可有效地减少这类涂料的沉淀和结块现象,从而减缓磨损和延长喷涂机使用寿命;喷涂时压力稳定,有利于控制和保证涂膜厚度及涂膜质量。
2.涂料液压系统的许多重要结构,均是针对无机锌涂料的特性而设计的,不易产生沉淀和结块,各高压阀口等重要零件不易损坏和磨损。
可接双枪喷涂;
耐磨柱塞泵体;
大排量;
压缩空气驱动,安全防爆;
漆雾飞溅少,浪费少,省漆环保;
维修费用比电动泵每年省3/4,
维修率极低;
专业人士每年喷涂量达60000升。
主要技术参数Technical parameters
型号 Model | 压力转 换比 Pressure exchanging rate | 空载排量(L/min) No-load displacement | 使用压缩空气 Compress air (MPa) | 空气消耗量 Air consumption (L/min) | 整机重量 Weight of the whole machine (kg) | 气缸直径 Diameter of cylinder (mm) | 外形尺寸(长宽高) Dimension lengthwidth height(mm) |
GP2538-2 | 38:1 | 33 | 0.3-0.6 | 100-1000 | 70 | 250 | 520580960 |
注:空载排量是指空载压力情况下的涂料排量
如有不明之处,请联系我们,我们会为您推荐适合于您使用的型号。
13801847352
- 上海特兰森涂装机械
- 手机:13801847352联系我时,请告知来自行业信息网!
- QQ:1215756037
- 邮箱:selanten@telansen.com
- 公司地址:上海市沪太路9611号
- 公司主页: http://shanghai509965.cn.cnlinfo.net