HJCJ01/02/03------轴(套)类零件综合检查机,检查机,轴承机
暂无促销活动
- 外径:10-100mm
HJCJ01/02/03------轴(套)类零件综合检查机
主要功能:
1、 适用于各类轴、套类零件的内径、外径、高度、锥度等各项参数的检测和分档;
2、 高度测量,零件直接通过式读数,0.1um分辨率;
3、 陶瓷球3点接触式内径测量,0.1um分辨率;可Y方向多位置测量并计算锥度值。
4、 陶瓷球3点接触式外径测量,0.1um分辨率;可Y方向多位置测量并计算锥度值。
5、 各检测工位自动根据设置的公差范围判断OK或NG,NG品在检测位置后方剔除;
6、 加工工序:上料机供料(或连线)---零件高度检查---NG品排出---零件内径检查
--- NG品排出---零件外径检查---NG品排出---合格品出料;
7、 智能的操作系统、7寸真彩触摸屏,参数及状态信息一目了然,操作方便、容易。
结构特点:
1、 可单机使用,也可与前工程连接后自动生产;
2、 采用精密升降滑台驱动测量传感器,轴或套类零件位于滑台下方时可以直接读取
高度方向尺寸。系统通过与预设的允差范围进行比较,对高度是否超差进行判断;
3、 内径、外径测量使用步进升降式测量模组,运用重复性优异的挠性测量台架
4、 并安装三点对称陶瓷测头,测量精准,同位置重复性误差小于0.5um;
5、 步进升降式测量模组可在Y方向设定多个测量位置,
通过对比可计算出锥度尺寸;
6、 各检测位置后设独立NG出口,NG品自动剔除;
7、 所有元器件均使用精选配置,保证了设备
长期连续工作的可靠稳定。
技术指标:
适用零件范围 | 外径10-100mm 内径5-80mm |
工作效率 | ≈4秒/件 |
轴承上料 | 上料盘供料或连线供料 |
测量传感器 | 电感式位移传感器 |
测量分辨率 | 0.1um |
电源 | 220V 50HZ 5A |
气源 | 0 .4MPa |
外型尺寸 | 12008001750 |
重量 | 约400KG |
无锡市惠荣自动化科技有限公司 电话:0510-85200718 传真:0510-85200728
WuXi HuiRong Automation Technology Co., Ltd. 网址: 邮箱:
HJCJ01/02/03 ------ Axle(sleeve)component comprehensive inspection machine
Major functions:
1、Applicable for detection and classification of various parameters like inner diameter, external diameter, height, taper etc, from all kinds of axle and sleeve components.
2、Height measurement, directly through type reading of component, 0.1um resolution.
3、Three points contact-type inner diameter inspection of ceramic balls, 0.1um resolution, multiple position measurement in the Y direction and tapers calculation.
4、Three points contact-type external diameter inspection of ceramic balls, 0.1um resolution, multiple position measurement in the Y direction and tapers calculation.
5、Each test station judges if the product OK or NG automatically according to the installed tolerance range, NG products are removed behind test positions.
6、Manufacturing procedures: feeder feeding(or ligature) --- component height inspection --- NG product ejection --- component inner diameter inspection --- NG product ejection --- component external
diameter inspection --- NG product ejection --- qualified products being finished.
7、Intelligent operating system, 7 inches true color touching screen, parameters and states
information display at the same time, clear at a glance, easy to operate.
Structuralfeatures:
1、 Using precision lifting sliding tables to drive measuring transducers, the height,
direction and size can be read directly when the axle or sleeve components are located under
the sliding tables. The system judges if the height exceeds the tolerance by comparing with
presupposed tolerance range.
2、 Measure inner and external diameter with step lift measurement module, using the
flexible measuring platform with excellent repeatability and installing three points symmetric
ceramic measuring heads, precise measurement, repeatability error in the same position is
less than 0.5 um.
3、 Step lift measurement module can install multiple
measuring positions in the Y direction, calculating tapers by
contrasts.
4、 Independent NG exports are setted up behind each test
position, automatic elimination of NG products.
Technical parameters:
Applicable range | external diameter 10-100mm inner diameter 5-80mm |
Working efficiency | <4 seconds for one piece |
measuring transducer | inductive displacement transducer |
measurement resolution | 0.1um |
Power | 220V 50Hz 5A |
Air source | 0.4MPa |
External dimensions | 12008001750 |
Weight | approximately 400KG |
无锡市惠荣自动化科技有限公司 电话:0510-85200718 传真:0510-85200728
WuXi HuiRong Automation Technology Co., Ltd. 网址: 邮箱:
13961888421
- 无锡市惠荣自动化科技有限公司
- 手机:13961888421联系我时,请告知来自行业信息网!
- QQ:82042435
- 邮箱:huirongat@163.com
- 公司地址:江苏无锡滨湖区荣巷街道梅园徐巷449号
- 公司主页: http://huirongat.cn.cnlinfo.net